(Berks and Bucks)
2 x double casement window repairs on a grade 2 listed building on Amersham High Street were not easy, the challenges were scaffolding with members of the public walking underneath as well as neighbours cars and all new leaded glass … Read More
This Yorkshire slider in Beaconsfield Old Town is a bit like a sliding sash but opens sideways.The bottom rail needed to be fully replaced but we saved the internal moulding .An a-b-c repair method was used all in Accoya wood … Read More
These 2 pairs of Georgian sashes needed a lot of love to get them back to perfect order.The main problem with them was that their bed putty had been built up with multiple layers over the years.Over time each time … Read More
This window didn’t need an entire new sill as only the front most exposed part had rotted.Thanks to the owner identifying the issue in time the rest of the sill was still in perfect order.A new extended sill was glued … Read More
This grade 2 listed building needed a hardwood new sill and the doors need rehanging.The moulded glazing bars were made from copper and not wood.The biggest challenge was both jambs had split and expanded ,this was caused by 1 inch … Read More
These rotten casements were completely rotten at the mortise and tenons joints with the rot being replaced by buckets of filler installed over the years it had been decaying. We re-jointed the tenons back using accoya wood and re-mortised the … Read More
This was another listed building window that had a rotten sill but this time instead of completely replacing and re-joining the sill we only replaced the front half cos the back half was still in perfect condition.This isn’t an easy … Read More
This window not only needed a new Accoya sill mortise and tenoned in but also the casement sashes were a bit rotten too.This repair required the side stiles to be stepped tenoned above the rot and the bottom rail end … Read More
6 x windows all leaded and double casement on a listed building in Churchgate Cookham need servicing with the main issue being the rebates weren’t deep enough to accommodate the depth of the leaded glass ,meaning there was no room … Read More
This rotten casement sash needed a whole new bottom rail made in Accoya.The bottom rail needed to be be re-joined using a mortise and tenon joint at both ends.A new mortise joint needed to be made at one of the … Read More